| |
Description
EPOXY COAL TAR is a two component, 100% solids, coal tar modified epoxy
system. It is ideally suited for use as a protective coating, membrane-sealer
or binder for concrete, asphalt and bituminous surfaces. Epoxy Coal Tar
develops a tough, chemically resistant surface. Epoxy Coal Tar provides
excellent protection against the deteriorating effects of water, deicing salts,
petroleum oil and fuel.
Basic Use
Coating:
Epoxy Coal Tar can be used as coating. It can be applied by brush, roller or
squeegee
Mortar: It can also be made into a
trowel able mortar by
adding 3-4 parts of sand
Broadcast: For a non-skid surface,
lightly seed or broadcast aggregate on to the wet coating and go over it with
the brush or roller. Use as much aggregate as needed to get the
skid proof
surface desired. Apply second coat if needed.
Advantages
Non flammable formula
Can be applied by brush, roller or spray
Easy application: Can be applied to vertical or horizontal
surfaces
Totally waterproof
Easy mix ratio 1:1
Flexible
Limitations
Apply at
temperatures above 40 degrees F. Exposure to temperatures exceeding 150 degrees
F. for long periods of time is not recommended.
Surface Preparation
Surfaces of
application should be clean and sound. Use conventional cleaning methods such
as acid etching or mechanical scarification.
Mixing Instructions
1. Stir each component separately
2. Blend 1 part of Base to 1 part
of Reactor by Volume and mix completely. Make sure to scrape sides and bottom
of mixing can. When material is mixed completely, it will be a uniform color,
with no streaks.
Coverage
As a coating,
coverage will be approximately 100 square feet per kit.
Physical
Properties/Technical Data
|
Mix Ratio: |
1:1 By Volume |
|
Pot Life: |
20 Minutes @ 75° F. 10-15 Minutes @
90° F. |
|
Final Cure (ASTM D-695): |
3 days @ 77° F. |
|
Tensile Strength (ASTM D 638): |
900 psi Minimum @ 14 Days |
|
Tensile Elongation (ASTM D 638): |
35% Minimum @14 days |
|
Hardness Shore D (ASTM D 2240): |
70 |
|
Water Absorption (ASTM C 413): |
1% Maximum |
|
Shelf Life: |
2 Years In Unopened Containers |
|
Color: |
Black |
Chemical
Resistance
Resistant to
mild mineral acids, alkali's, detergents, solvents, syydrol, hydraulic fluids,
lubricating oils, deicing salts, etc.
Packaging
3/4
gallon unit/25lbs. Aggregate.
© Copyright
1999-2002 · All rights reserved US Epoxy, Inc.
268 Route 112, Patchogue, NY 11772
(800) 332 · 3883 · fax (631) 654 · 0217
email:
info@usepoxy.com
|
|